Alarm information:
Cause |
The number of registers and retentive structures requested in the configurator is excessive (see keywords nvr, nvrr,nvsr and retentive) |
Output condition |
|
Effect |
The registers are reset, but if you return to the previous configuration without resetting the alarm, the value of the registers is restored. After the alarm is reset, the default configuration is imposed |
What to do |
Reduce the number of registers and/or retentive structures requested, use the shell report (or mreport) command for more information |
Alarm mask |
am[0].16 |
Alarm par prominent |
No |
Alarm type |
|
Notes |
Before RTE 34.9.2, the alarm was "9000 User Retentive Area Too big." |
