Alarm information:
Cause |
This message is sent if there is no PORT_0 link detection bit in the ESC_DL_Status register (ESC address 0x0110). In this case, the EtherCAT Slave interface goes to the PRE_OPERATIONAL state |
Output condition |
Emergency: FF80h 01h 00000003FFh |
Effect |
|
What to do |
|
Alarm mask |
am[34].9 |
Alarm par prominent |
|
Alarm type |
|
Notes |
From RTE v34.11.3 emergency messages are handled as alarms: to disable the new handling act on bit 1 of the variable sys_cfg. Alarm related to the uRio device (AS3039.001) connected on the EtherCAT network |
