FILE: RSW.CFGXVedi: Configurazione RTE, File in Flash |
Non è necessario per il funzionamento ma viene autogenerato da RTE nell'allias di cartella HW_DIR [in USER_DIR nel caso HW_DIR risultasse piena] a seguito del comando shell AUTOCONFIG.
Segue il file RSW.CFGX (xml format) relativo al controllo uRMC (AS1017.001):
<?xml version="1.0" encoding="UTF-8" ?> <!-- ROBOX Cpu PN AS1017.001 - self created /F@/RSW.CFG file --> <Rsw> <network> <interfaces> <ETH1 type="inet" status="off" simulation="NETINT"> <ip configuration="static"/> <ip address="192.168.0.11"/> <ip netmask="255.255.255.0"/> <ip gateway="192.168.0.1"/> </ETH1> </interfaces> <services> <!-- Robox services --> <bcc3-tcp status="off" security="off" debug="off" verbose="off" dump_msgs="off"> <transport protocol="tcp"/> <transport port="8000"/> </bcc3-tcp> <!-- Standard services --> <tftp-udp status="off" debug="off" verbose="off" dump_msgs="off"> <transport protocol="udp"/> <transport port="69"/> </tftp-udp> </services> </network> <devices> <ramdisk> <!-- Robox ramdisk devices definition --> <RAMDISK1 status="disabled"> <disk type="RRD"/> <disk devicename="rdska"/> <disk ksize="4096"/> <disk mountpoint1="/rdska1"/> </RAMDISK1> <RAMDISK2 status="disabled"> <disk type="RRD"/> <disk devicename="rdskb"/> <disk ksize="4096"/> <disk mountpoint1="/rdskb1"/> </RAMDISK2> <RAMDISK3 status="disabled"> <disk type="RRD"/> <disk devicename="rdskc"/> disk ksize="4096"/> disk mountpoint1="/rdskc1"/> /RAMDISK3> RAMDISK4 status="disabled"> disk type="RRD"/> disk devicename="rdskd"/> disk ksize="4096"/> disk mountpoint1="/rdskd1"/> /RAMDISK4> /ramdisk> /devices> /Rsw> |
