Alarm information:
Cause |
Unable to return the PROF.INT board to operation. Possible misconfiguration |
<code> |
Error code: •8 = Configuration (number of 32-byte blocks) received from DP master different from that set in pfb.cfg file •9 = Profibus communication management hardware error (SPC3) |
Output condition |
Bit 10 of sys_flag_2 is set to 1 |
Effect |
Profibus management disabled |
What to do |
With version of RTE less than or equal to v34.27.01 turn the control off and on again to try to re-enable communication. With version of RDE greater than or equal to v34.27.02 is reset if the cause does not persist |
Alarm mask |
am[50].24 |
Alarm par prominent |
No |
Alarm type |
|
Notes |
|
