Alarm information:
Cause |
Emergency from drive |
<axis> |
Axis number (1-32) |
<name> |
Device type name (TWn, AXM) |
<code> |
Alarm codes for TWm type: •0x4210 = Device over-temperature •0x4211 = Motor over-temperature •0x4310 = Over-temperature power section Alarm codes for AXM type: •0x4001 = The drive power module has reached an over-temperature •0x4002 = The drive is reporting poor functioning of the cooling system •0x4211 = Over-temperature of the motor •0x4310 = The estimated junction temperature has reached an excessive temperature •0x4311 = The heat sink has reached an excessive temperature |
Output condition |
|
Effect |
Causes set one bit in the predefined variable hold |
What to do |
Check the status of the drive |
Alarm mask |
am[<axis>].19 |
Alarm par prominent |
No |
Alarm type |
|
Notes |
From RTE v34.13.8, emergency messages related to PHASE drives TWn and AXM are handled as alarms. Alarm related to PHASE drives connected on field bus. Performance is enabled by indicating in the project configurator RTE, axis, transducer/actuator, TWn or AXM family drives. Refer to the drive manual for more information |
